請教，Audyssey MultiEQ

katsui

而家有啲新嘅AV Amp 用Audyssey 房間修正系統，但有啲寫住 MultiEQ XT , 有啲寫住 multiEQ XT32. 咁XT 好啲定XT32 好啲？

avmilk

multiEQ XT32

jj1996

ching記住多試多聽，用心比較，始終零聽者是你自己本人！

katsui

jj1996 發表於 2013-3-3 16:18
ching記住多試多聽，用心比較，始終零聽者是你自己本人！

Thanks for advise. 只係唔明點解仲有啲貴價AV Amp (e.g. 老麥121）用 XT 啫，係咪XT都有佢可取性？

jj1996

katsui 發表於 2013-3-3 16:28
Thanks for advise. 只係唔明點解仲有啲貴價AV Amp (e.g. 老麥121）用 XT 啫，係咪XT都有佢可取性？ ...

最緊要是，經濟之餘，又靚聲！

hikaru

katsui 發表於 2013-3-3 16:28
Thanks for advise. 只係唔明點解仲有啲貴價AV Amp (e.g. 老麥121）用 XT 啫，係咪XT都有佢可取性？ ...

http://www.audyssey.com/audio-technology/multeq


lee 個網幫到你...

katsui

hikaru 發表於 2013-3-6 19:58
http://www.audyssey.com/audio-technology/multeq

正呀，Thanks for help .

ReferenceOnly

one major difference between XT and XT32 is that XT32 can EQ two different subwoofers. This is huge advantage for those with two subwoofers in two very different locations. XT32 takes into account of the interaction between the two subwoofers.

hikaru

ReferenceOnly 發表於 2013-3-26 03:38
one major difference between XT and XT32 is that XT32 can EQ two different subwoofers. This is huge  ...

但onkyo TX-NR727, 佢用Audyssey Multi EQ, 未到XT/XT32, 都可以cal two sub-woofers.

katsui

ReferenceOnly 發表於 2013-3-26 03:38
one major difference between XT and XT32 is that XT32 can EQ two different subwoofers. This is huge  ...

咁如果只得一隻十仔，XT 同 XT32係咪冇乜分別？

ReferenceOnly

hikaru 發表於 2013-3-26 11:11
但onkyo TX-NR727, 佢用Audyssey Multi EQ, 未到XT/XT32, 都可以cal two sub-woofers. ...

i believe that is one curve/graph for both sub, instead of 2 separate set of calibration curves for each subwoofer. :)

ReferenceOnly

katsui 發表於 2013-3-26 18:33
咁如果只得一隻十仔，XT 同 XT32係咪冇乜分別？

if only one sub, difference to me is minimal. certainly not different enough to discount/discredit machine that only has normal XT.

hikaru

ReferenceOnly 發表於 2013-3-28 04:25
i believe that is one curve/graph for both sub, instead of 2 separate set of calibration curves fo ...

好似2012年 onkyo,

818 係一部用XT32, 可用2 x subs, 但入面無得set 2nd 隻sub距離/Level, 咁就有機會係一齊cal (假設sub位置係一左一右)
1010/3010/5010, 可用2 x subs, 可以獨立set 2nd 隻sub距離/Level, lee個情況就一定係獨立cal.

其實問題並非用咩技術先 cal 到 2 x subwoofers......係睇間廠點設計隻amp, 有一樣嘢可以留意吓, 1 x DAC, 有2個channels, 在設計上, 如sub1/sub2佔各1條channel, 係可以做到獨立set 距離/Level.
但若果DAC因成本, 只靠1條channel, 又想做2隻subwoofer, 就會好似用1開2既方式去support, 咁佢點cal, 只有設計者先知.....