|
|
發表於 2017-1-12 18:51:11
|
顯示全部樓層
小弟近月亦遇唔少業餘代理，價錢貴過原廠 MSRP 都算，貴到爆嘅線就算俾全數 deposit 都無 home trial 但又借俾熟客，想訂 bi-wire 佢話廠無做，但人地webpage 寫明 tri-wire 都有等等.....只識收得貴買咗話之你又亂噏一通冷門少少都要訂幾個月嘅貿易公司。最佳辦法係直接 send email 甚至打電話俾同原廠，有時甚至會繞過代理直接幫你解決。
師兄嘅例子只就又係亂噏諗住大你2百萬等你知難而退。
擇錄自原廠網業:
Weight Capacity
On flat surfaces: The Segue shares the high weight capacity of all Symposium platforms and has moderate cantilever strength. Placed flat upon a uniform support surface (such as a shelf, table, floor, etc.), it has a theoretical weight limit of several hundred pounds (>150 kG) or more.
When placed on top of cones, rack posts, etc: When only supported at three or four contact areas (such as couplers, cones, vertical rack legs, etc), very high weight loads (greater than 100 pounds or about 45 kG) should be avoided. With moderately heavy weight loads of more than about 40 pounds (18 kG), the support contacts should be placed or located directly beneath and inside the footprint of the load itself, and not outside the load's perimeter.
7kg？我個煲蓋都唔止啦。 |
|
樓主: Casper728
IP卡
狗仔卡
顯身卡
發表於 2017-1-12 21:06:13
