|
|
New TechDAS TechDAS Air Force 10 tonearm
https://www.monoandstereo.com/20 ... rce-10-tonearm.html
TechDAS writes: "All our unique vacuum hold-down and air bearing technologies developed for the TechDAS Air Force turntables, as well as our accumulated knowledge and experiences with the precision machining of titanium and tungsten, are distilled into the new TechDAS Air Force 10 tonearm."
"After almost three years of developing and designing for the new tonearm, the result is the most smooth and precise motion of the tonearm due to our air bearing technologies. This allows to reproduce the most minute and subtle detail embedded in the record groove and to give you a you-are-there feeling. Furthermore, the highest damping characteristics of the materials used for the arm tube and main body make it possible to deliver ultimate silence and all the information picked up by the cartridge."
Major features
• Bearing mechanism
Horizontal
TechDAS Float' alr bearing system
Vertical:
Tungsten plot + ceramle ball bearings
• Artube
Hybrld 2 layer structure
Outer. magneslum alloy with DLC coating
Inner:
CFRP (Carbon Fiber ReInforced Plastics)
• Tracking force adjustment
Spring Pressure dynamic balance
• Arm mount
TechDAS original hellcold helght adJustable mount
• Extemal alr pump unit
1 pump system for Intake/exhaust
The TechDAS Alr Force 10 tonearm will be avallable In two lengths of 10 and 12 Inch. (phono cables not Included)
The final pre-production unit will be Introduced at the Tokyo International Audlo Show In November, 2023. Productlon Is expected to start In fall, 2023.
Pivot to Spindle:
230mm
Effective Length:
248mm
overhang
18mm
Offset Angle:
23 degrees
Inner Offset:
96.9mm
Inner Null Point:
689mm
Outer Null Polnt:
124.9mm
Maximum Error:
1.4 degrees
MaxImum Distortion:
0.95%
Average RMS distortion:
039%
DIN 5pIn output connector
Welght:
23 kg |
評分
-
2
查看全部評分
-
|
IP卡
狗仔卡
發表於 2023-6-8 14:39:02
提升卡
置頂卡
沉默卡
喧囂卡
變色卡
顯身卡
發表於 2023-6-8 16:43:33
