Jriver的設定問題

chhanthony

小弟是用Lenovo notebook，印象中好似只有2gb ram，同時亦是位CAS的初哥，
上兩個月才入手了一部有DSD解碼的DAC，學人去玩下DSD，
但小弟是百份百的電腦白痴，是個只會按"下一步"的人，
現有一些Jriver設定上的問題希望各位大哥可以幫幫小弟，
本來小弟是用foobar2000加sacd plug-in播放sacd iso及diff檔案
但一直見網上的朋友說HQplay，Audiogate及Jriver均比foobar2000好聲得多
所以希望試下其他軟件，但HQplay同Audiogate並不support sacd iso playback
所以小弟就安裝了Jriver，跟了DAC廠商的指示的確可以播放sacd iso及diff檔案
但每次用Jriver播放sacd iso或diif時開始時會出現一些"僕僕"聲的雜音，
在Computer Audiophile問過這個問題，有位外國教我在buffer中set大2-3秒
我在setting中見到一個叫Pre-Buffer一個叫Buffer，但不論我將兩個設定set到最大(20 sec同500ms)都一樣出現"僕僕"聲，分別只是"僕僕"聲的速度。

現希望各位大哥可以教下小弟如果令到這些討厭的"僕僕"聲消失，另外如果用SACD Extract去將SACD iso轉成diff困難嗎?

謝謝各位!

chhanthony

好像找到方法解決了，今晚試試

各位好!mytek 192用jriver播放SACD-R时，每次stop后再播放缓冲时音箱中都会有哒哒声，会持续几秒，不选“present 24 bit data in a 32 bit package”这个就没事，我是用笔记本播放，i5的，8G内存（选择内存播放也是这样），请问这是为什么呢？另外不选“present 24 bit data in a 32 bit package”对播放效果会有什么影响呢？谢谢

appletim

Hi Chhanthony hing,
Can you share your setup in Jriver? I tried to use Jriver to run DSD file, but it run buffer all the time and make the notebook heavy delay.

My notebook is i3 + 8g RAM. Tks!

chhanthony

appletim 發表於 2012-12-6 12:42
Hi Chhanthony hing,
Can you share your setup in Jriver? I tried to use Jriver to run DSD file, but  ...

因為開頭嘅"僕僕"聲太過煩，我都未試過完整咁聽完一首歌，今晚試完再覆你。

ivanchan

小弟想問...以PCM轉DSD計, DSD係咪正過PCM 好多??

如要玩盡DSD, 係咪要rip LP?? rip CD 後再由PCM轉DSD有改善嗎??

chhanthony

ivanchan 發表於 2012-12-6 14:24
小弟想問...以PCM轉DSD計, DSD係咪正過PCM 好多??

如要玩盡DSD, 係咪要rip LP?? rip CD 後再由PC ...

Ivanchan兄

我試過用PCM(44.1 khz wav)經foobar轉做DSD64/DSD128畀Mytek做解碼
我嘅感覺係轉做DSD後比較薄咗同數碼咗，玩咗半個鐘後就無玩了。
要玩盡DSD當然係攪一啲用DSD錄音或以前用Analog錄音嘅曲目，
可以合法買嚟download，
亦可以自己用PS3 rip，同用你嘅方法download。

但要知道pop song同中文歌一般比較少出SACD，Classical同一啲舊嘅外國錄音會比較多

http://www.sa-cd.net/dsd

BTW: 噚晚試咗兩隻胡桃夾子，無表明係DSD錄音的比有表明DSD錄音的好，所以除咗用咩技術錄外，咩人做指揮(呢個我真係唔識分)同錄音時做得好唔好都有好大影響。

Tchaikovsky: The Nutcracker - Vedernikov
http://www.sa-cd.net/showtitle/4307
DSD Recording


Tchaikovsky: The Nutcracker - Rattle
http://www.sa-cd.net/showtitle/7364

ivanchan

chhanthony 發表於 2012-12-6 14:40
Ivanchan兄

我試過用PCM(44.1 khz wav)經foobar轉做DSD64/DSD128畀Mytek做解碼

thanks ching

chhanthony

appletim 發表於 2012-12-6 12:42
Hi Chhanthony hing,
Can you share your setup in Jriver? I tried to use Jriver to run DSD file, but  ...

appletim兄

我用上述方法已經解決了僕僕聲問題
而用default setting下播dsd無出現問題
亦好聲過foobar
不過佢用分類揀歌對我嚟講唔太方便

suedehk

chhanthony 發表於 2012-12-6 23:33
appletim兄

我用上述方法已經解決了僕僕聲問題

用TAB 找GIZMO 可以當REMOTE選歌 有COVER ART, 我都是玩左JRIVER 2星期,沒去研究設定,師兄靠你分享了.

chhanthony

suedehk 發表於 2012-12-14 23:32
用TAB 找GIZMO 可以當REMOTE選歌 有COVER ART, 我都是玩左JRIVER 2星期,沒去研究設定,師兄靠你分享了. ...

suedehk兄

我都是用GIZMO作remote但我實在唔太習慣用分類揀歌，加上我有好多wav係無tag到，所以好多歌無咗。
以聲嚟講係好過foobar2k，但foobar2k就方便啲。

appletim

Hi Ching,

I just bought Mytek DSD DAC and have some problems cannot be fixed to play under JRiver or Jplay. I'm using USB and WASAPI to play.

1) For JRiver, I play the DSD file with following the instruction that came with manual. However, the output cannot shown DSD/176kHz but just shown 96kHz.

2) For JPlay, no matter I set buffer how large, the sound still have lot of noise. Even, the display in Mytek didn't shown the input kHz.

I have try many methods, even alot of setting but still cannot play DSD file. My Mytek version is 1.7 and installed 1.33.1 driver in PC.

Thank you!!!

appletim

The panel cannot shown DSD and like this 數字不停跳.
I have set the Bitstreaming to DSD over PCM in JRiver. Any Ching can help? Tks alot!!

k500a

C-hing,
Please check if this pdf can help:
http://mytekdigital.com/support_ ... etup_guide_v1.0.pdf
.
The output mode is wasapi-event style.
please also check if the real native dsd file used.
You can download some real native dsd file below:
http://www.2l.no/hires/index.html
scroll down 'Special resolutions and audio formats:'
and download the one under column
'Stereo DFF
DSD 64
2.8224Mbit/s'
.
Hope this help

appletim

K500a hing,

Thanks your help, I have following the guideline to set the output mode to wasapi-event style. But still failure. Let me try to download file to test again.

chhanthony

appletim 發表於 2013-1-13 16:41
K500a hing,

Thanks your help, I have following the guideline to set the output mode to wasapi-event ...

have you try anther usb cable?

appletim

yes, tried other cable but still the same

appletim

Any ching has success to use USB via Asio or Wasapi to play DSD file under JRiver environment? can u share the setting. tks!

chhanthony

appletim 發表於 2013-1-13 22:37
Any ching has success to use USB via Asio or Wasapi to play DSD file under JRiver environment? can u ...

我之前用Win7同jriver，跟足manual set完全無問題喎

appletim

chhanthony 發表於 2013-1-13 22:49
我之前用Win7同jriver，跟足manual set完全無問題喎

Can you share your setting, I also 跟足manual set

chhanthony

appletim 發表於 2013-1-13 22:52
Can you share your setting, I also 跟足manual set

我過兩日開返部notebook 睇下