Help Needed on Clearaudio Concept

willip

Got the Concept for a few months but really not much time to play.  The performance is also much below my expectation with a lot of distortion in the sound reproduction.

There isn't much I can set on the Concept as supposed all is tuned by factory, any C Hing can help me?

patkwok

師兄,你部turntable是否係hifi德到買?
試下打電話返去問下有無得攪?

willip

patkwok 發表於 2013-5-2 08:58
師兄,你部turntable是否係hifi德到買?
試下打電話返去問下有無得攪?

I bought from Michael's Audio but is hong goods from HIFI Duck.

bcychung

叫呢度D師兄上門家訪，他們會很有心地幫忙調教。

willip

bcychung 發表於 2013-5-3 08:04
叫呢度D師兄上門家訪，他們會很有心地幫忙調教。

I live in North Point and here is my current systems, please see any hi-hand c hing can help:

1) TT: Clearaudio Concept -> built in MM phono of McIntosh C50
2) CAS: Mac Mini --> Wireworld platinum USB --> Chord Chordette DAC --> Taralabs Vector 1 RCA --> C50
3) Amp: McIntosh C50 (Wireworld Silver Electra PC) --> XLO Ref 3 XLR --> MC275
4) Speakers: Sonus Faber Guaneri Memento

馬丁

willip 發表於 2013-5-3 09:43
I live in North Point and here is my current systems, please see any hi-hand c hing can help:

1)  ...

Hi willip C-hing I think we need ur Cartridge Specifications .
●Cartridge type: ?
●Rated output voltage:?
●Impedance:?

Also ur Phono Specifications ?

Then other hi-hand c hing can help U

willip

馬丁 發表於 2013-5-3 10:05
Hi willip C-hing I think we need ur Cartridge Specifications .
●Cartridge type: ?
●Rated output  ...

For the 1st 3, it is the standard cartridge that comes with the Concept and basically I have not much idea besides knowing that it is a MM head.

The Phono is the built in Phono of the McIntosh C50...

Sorry that I am really a low hand in TT

馬丁

willip 發表於 2013-5-3 11:17
For the 1st 3, it is the standard cartridge that comes with the Concept and basically I have not m ...

Check 吓説明書睇吓有冇寫

馬丁

willip 發表於 2013-5-3 09:43
I live in North Point and here is my current systems, please see any hi-hand c hing can help:

1)  ...

C兄 幫你check 左 Mc C50 係MM phono 但 Clearaudio Concept 跟來的係mc頭有0.4mv ..所以係你個phono唔match個唱頭.所以唔够Gain 貢你係咪角得D聲 冇理神氣死吓氣死貢吖又有D拆吖???

bcychung

馬丁 發表於 2013-5-3 14:34
C兄 幫你check 左 Mc C50 係MM phono 但 Clearaudio Concept 跟來的係mc頭有0.4mv ..所以係你 ...

講得好，分析清楚。

即是話，要加個 phono pre-amp。

馬丁

bcychung 發表於 2013-5-3 17:08
講得好，分析清楚。

即是話，要加個 phono pre-amp。

師兄好. 佢可以加phono-amp or step-up牛.有錯請改正

馬丁

bcychung 發表於 2013-5-3 17:08
講得好，分析清楚。

即是話，要加個 phono pre-amp。

多謝bcychung兄.

willip

馬丁 發表於 2013-5-3 14:34
C兄 幫你check 左 Mc C50 係MM phono 但 Clearaudio Concept 跟來的係mc頭有0.4mv ..所以係你 ...

thanks c hing. but my cartridge should be MM instead of MC.

bcychung

willip 發表於 2013-5-3 22:29
thanks c hing. but my cartridge should be MM instead of MC.

Please check your cartridge output voltage

willip

bcychung 發表於 2013-5-3 22:32
Please check your cartridge output voltage

From web:

Output voltage 3.3mV
Tracking ability: 2.0g (is this the weight I need to adjust to??)
Coil inductance: 47K Ohm
Load capicitance: 100pF

DAX

willip 發表於 2013-5-4 06:44
From web:

Output voltage 3.3mV

即係MM頭，入内置MM Phono 冇問題啦!
咁你有冇set好唱重去大約2.0g?

willip

DAX 發表於 2013-5-4 11:35
即係MM頭，入内置MM Phono 冇問題啦!
咁你有冇set好唱重去大約2.0g?

so tracking ability equals to weight?

DAX

willip 發表於 2013-5-4 13:36
so tracking ability equals to weight?

個網寫得唔好，應該寫 VTF - Vertical Tracking Force 好啲。
2 gram , recommended 1.8 - 2.6g 係咪？

willip

炒豆得好緊要

DAX

willip 發表於 2013-5-4 13:54
炒豆得好緊要

炒豆關啲碟事，新定舊碟？