Anyone using analogue output from Blu-ray players ?

ccscho

May I know any ching using analogue output from Blu-ray player for surround playback rather than via HDMI to AV amp please?

How does the sound compare by analogue output from Blu-ray player and AV amp ?  

Example Oppo 103D/105D and Cambridge Audio 751BD/752BD, around what level of AV amp can they compare to?
What will be missing in features that are necessary?

MingSir

If you have a cheap or outdated AV amp and a up-to-date high quality Blu-ray player, you are advised to use the blu-ray player to decode the signal (i.e. what you said analog output), then output all the channels to a power amp/ active speakers...etc !

ice_man

751BD、752BD或者BDP-105入面嘅DAC唔錯的，聽CD用analog出基本上會好聲過用HDMI，除非你部amp嘅DAC好正或另外加部外置DAC解碼器就另計 ，不過出sourround sound的話就好少會用analog output喎...

kelvinchow8

analogue output from Blu-ray player . 其實好睇藍光機解碼能力。因為analogue輸出質素要求比bitsteam要求為高。

103D/105D , 751/752個多聲道analogue輸出設計重點唔係主要，似係付加功能多d。

claero

我咁樣玩左好幾年，個問題係前级的analog input得吾得，我試遇有時吾搞好過搞

marantz9004 去marantz8801

pioneer 09 去cary11a

以上兩部會衰過部中階bluray行hdmi

至於751的訊息量吾錯，但聲無肉地，越閞大聲越浮，可能可以好啲但有排搞

所以主要睇番部前级的最少以前三萬以上等级無乜走雞同埋模擬入有冇做a to d, d to a，因為經proccessing可以減到部分日本機d to a出來的日本味差好遠

kelvinchow8

claero 發表於 2014-3-25 14:37
我咁樣玩左好幾年，個問題係前级的analog input得吾得，我試遇有時吾搞好過搞

marantz9004 去marantz8801

marantz9004 去marantz8801  ........

claero

kelvinchow8 發表於 2014-3-25 15:08
marantz9004 去marantz8801  ........

理倫上應該好正……音質有改善，但開大好多db都冇肉冇量，所以卒之都係算把啦

kelvinchow8

claero 發表於 2014-3-25 15:22
理倫上應該好正……音質有改善，但開大好多db都冇肉冇量，所以卒之都係算把啦 ...

我都覺得Re-proccessing係重點。無嘅話，HDMI 。

claero

kelvinchow8 發表於 2014-3-25 15:37
我都覺得Re-proccessing係重點。無嘅話，HDMI 。

要求高就一定要有processing

但冇嘅話，一部classe 或krell以前二佬加部denon 3800都可以爆到傻，日本機起碼要avp先有得秋，咁玩比起avp會輸分析力，但狠勁同肉地就超越了

kelvinchow8

claero 發表於 2014-3-25 15:47
要求高就一定要有processing

但冇嘅話，一部classe 或krell以前二佬加部denon 3800都可以爆到傻，日本機 ...

Classe同krell都比你玩埋！勁。

claero

kelvinchow8 發表於 2014-3-25 15:50
Classe同krell都比你玩埋！勁。

都係借來AB秋下

MDLP

如果你懷疑你個SurrAmp個DAC部份唔得
你就更加唔好用7.1/5.1 analog in 去 SurrAmp
因為入到去都要 ADC > DSP > DAC 出返來

samuelhin

MingSir 發表於 2014-3-25 09:07
If you have a cheap or outdated AV amp and a up-to-date high quality Blu-ray player, you are advised ...

完全同意！

ccscho

claero 發表於 2014-3-25 15:47
要求高就一定要有processing

但冇嘅話，一部classe 或krell以前二佬加部denon 3800都可以爆到傻，日本機 ...

Assuming if you have got good pre-amp (2 channel x 3),  what do you think ?

claero

ccscho 發表於 2014-3-25 23:19
Assuming if you have got good pre-amp (2 channel x 3),  what do you think ?

do u mean u have 3 piece same pre amp ?

ccscho

claero 發表於 2014-3-25 23:41
do u mean u have 3 piece same pre amp ?

I just want the front 3 channels to be of similar quality.  The rear 2 channels can be something of lesser grade or even completely different.

claero

ic, i did search that av199 have someone who play like this

kelvinchow8

ccscho 發表於 2014-3-25 23:44
I just want the front 3 channels to be of similar quality.  The rear 2 channels can be something o ...

新玩法 !

kelvinchow8

claero 發表於 2014-3-25 23:52
ic, i did search that av199 have someone who play like this

三部前㸃樣一齊大細聲？距離/低管/sur mode 點控制？可以講多d？

ccscho

kelvinchow8 發表於 2014-3-26 09:53
三部前㸃樣一齊大細聲？距離/低管/sur mode 點控制？可以講多d？

That seems like a problem.  Even Logitech programmable remote can only choose 1 device for the volume control only.  Unless you have exactly identical model pre/amp otherwise the volume control can be a problem.

No reason to use crestron just for volume control, right?!