已停產產品- logitech sbt

chhanthony

rklpoon 發表於 2012-10-28 21:39
add pic:-

Have you set the audio output to "digital and analog"?
If you installed EDO, you have to set it to "digital only".

rklpoon

chhanthony 發表於 2012-10-29 13:54
Have you set the audio output to "digital and analog"?
If you installed EDO, you have to set it to ...

not yet, will try, thx.

rklpoon

Bei_Hillgrover 發表於 2012-10-29 13:52
Ching 是以同軸線連接及以anthem receiver作為DAC嗎? coaxial線最好用75ohm的.

thx.

rklpoon

now using akg headphone(gift, many years ago), want to connect to anthem receiver via coaxial as another option. thinking of adding a comparablein quality wireless headphone(more convenient, no messy wire hanging around), but budget is tight(below $1k, not much demand in quality, convenienc comes first), any good c/p recommendation pls? thx.

rklpoon

initial wrap up after reaearch:-

jimmypkh

Bei_Hillgrover 發表於 2012-10-28 23:58
小弟發現將 EDO(/etc/squeezeplay/userpath/settings/EnhancedDigitalOutput.lua）的buffertime value 改細 ...

rklpoon

3rd party app 個enhanced digital output 話會disable analogue output之類,唔係好明,查實我無乜192khz file, 主要用途係駁headphone(方便)及經coaxial 駁reveiver出喇叭出聲. thx.






- 发送自我的 Nexus S 大板凳android版

rklpoon

chhanthony 發表於 2012-10-29 13:54
Have you set the audio output to "digital and analog"?
If you installed EDO, you have to set it to ...

not yet installed EDO(enhanced digital output) as i found it a little bit confusing(per #90).

i have connected  a coaxial cable from sbt to my anthem receiver, now playing internet radio only, but found that the volume level output of sbt is significantly lower than playing anthem's build in internet radio, and i have to set sbt vol level at 100%, but at such level my headphone sounds too loud(i intend to plug in the headphone always), and that requires me to choose 100% fixed volume when listening via receiver, but not so when listening via headphone<----a bit inconvenient for me to do so/switch each and every time in between.

chhanthony

rklpoon 發表於 2012-10-30 19:57
not yet installed EDO(enhanced digital output) as i found it a little bit confusing(per #90).{:5_6 ...

you plug in the headphone to which device?

rklpoon

chhanthony 發表於 2012-10-30 20:40
you plug in the headphone to which device?

into the sbt, as i intend to hear songs with only sbt and an usb hdd plugged in sbt, maybe be a good sounding system, but it is simple and convenient(my priority for the time being).

chhanthony

squeezebox 唔係headphone amp 嚟，你都係插anthem啦

jimmypkh

chhanthony 發表於 2012-10-30 22:20
squeezebox 唔係headphone amp 嚟，你都係插anthem啦

Agree ar... set the volume of SBT to fixed (100) then output everything (both headphone and speaker) from anthem.

Just not sure if the DAC in anthem is better than that in SBT. Maybe you can try and let us know

rklpoon

chhanthony 發表於 2012-10-30 22:20
squeezebox 唔係headphone amp 嚟，你都係插anthem啦

oic,thx.

rklpoon

jimmypkh 發表於 2012-10-30 22:53
Agree ar... set the volume of SBT to fixed (100) then output everything (both headphone and speake ...

thx

will try when have time....(but busy lately and lazy as usual)

four4

rklpoon 發表於 2012-10-30 19:30
3rd party app 個enhanced digital output 話會disable analogue output之類,唔係好明,查實我無乜192khz fi ...

disable analogue output 即係停左analogue 既部份, headphone 3.5mm 同RCA 會無signal
使SBT入邊行少D野..

coaxial 平平地用apogee 廠線~ 平靚正呀

rklpoon

four4 發表於 2012-10-31 14:35
disable analogue output 即係停左analogue 既部份, headphone 3.5mm 同RCA 會無signal
使SBT入邊行少D野 ...

thx, 但headphone無聲出我唔掂wor, 都係寧願無192Khz算數la.

four4

rklpoon 發表於 2012-10-31 15:18
thx, 但headphone無聲出我唔掂wor, 都係寧願無192Khz算數la.

但可以config 到唔diable 架

rklpoon

four4 發表於 2012-10-31 15:19
但可以config 到唔diable 架

setting/config 有得揀? 有無相/圖睇下呀? thx.

chhanthony

rklpoon 發表於 2012-10-31 15:40
setting/config 有得揀? 有無相/圖睇下呀? thx.

choose "digital + analog"

rklpoon

chhanthony 發表於 2012-10-31 16:58
choose "digital + analog"

thx.